MikroTik

- Low-cost passive PoE base unit for powering passive PoE devices over ethernet - Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device - Helps reducing number of wires that

- The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets - Fits all standard RB2011

- The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet - Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device - Helps reducing number of wires that lead u

- The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas - The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane - With the quickMOUNT pro it is possible to perfectly

- The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas - You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment - The qu

- MMCX to RPSMA pigtail,for adding second wireless interface to BaseBox2 or BaseBox5 - Length of cable 260mm

- U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)

- Dual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA male connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac2 to have powerful Dual-Band Outdoor A

- 24v 1.2A power supply with right angle plug. Available with either US (type A), EU (Type C) or UK power plugs - Output Voltage: 24V 1.2A

- 24v 1.2A power supply with straight plug - Output Voltage: 24V 1.2A

Mikrotik 24V 1.2A power supply with angled connector SAW30-240-1200GR2A24V 1.2A power supply with straight plug. Output voltage: 24V 1.2A Official manufacturer website: https://mikrotik.com/product/saw30_240_1200gr2a#fndtn-specifications

24V 1.2A power supply with flat connector. Available with power plugs for the US (Type A) or EU (Type C). Output voltage: 24V 1.2A Official manufacturer website: https://mikrotik.com/product/saw30_240_1200ga#fndtn-specifications